Cabletron Systems SPECTRUM SEHI100TX-22 - Manual (Page 43)

Enabling and Disabling Link/Seg Traps 3-7
Link/Seg Traps
To change the setting in the Set Trap Status For field, click on the currently
displayed setting, and drag down to select a new setting.
4. Click on the appropriate selection in the Link Traps field to Enable or Disable
link traps for the selected ports, as desired.
5. Click on the appropriate selection in the Segmenting Traps field to Enable or
Disable segmenting traps, as desired.
6. Click on to save your changes; click on to exit the
window.