Cabletron Systems SPECTRUM SEHI100TX-22 - Manual (Page 51)

Monitoring Redundancy 4-7
Repeater Redundancy
To set the Poll Interval:
1. In the All Circuits box, type in a new value in the Poll Interval field and click
. Poll Interval is the time in seconds between retries (if the first
attempt is unsuccessful).
To set the Test Time:
1. In the All Circuits box, type a new test time in the Test Time field in a 24-hour
HH:MM:SS format and click
. The Test Time is the time of day when
the SEHI100TX polls the addresses listed in each of the enabled circuits.
To immediately test all enabled circuits:
1. Click in the All Circuits box.