COBY electronic DVD938 - Manual (Page 23)

Page 22 Coby Electronics Corporation www.cobyusa.com Page 23
En
gl
ish
Connections
Power Supply & Installation
Power Supply
Plug the power cord of this unit into an AC 100-240V 50/60Hz wall out-
let, only. Make all video, speaker, and audio connections before
connecting the power.
Do not connect the power plug to a power outlet other than
that which is indicated here and on the rating label as this
may result in the risk of fire or electric shock.
Do not handle the power plug with wet hands. Doing so may
cause electric shock.
Power Management
If the unit will not be in use for a long period of time, turn the unit off
and unplug it from the AC power supply, and remove the batteries
from the remote control.
Installation
Install the unit on a level, flat and firm surface with good ventila- 
tion. Never block the cabinet vents; blocked vents will cause the
unit to overheat and malfunction.
Do not install the unit in a place exposed to heating sources or

direct sunlight.
Do not install the unit in a place exposed to moisture or rain.
