COBY electronic DVD938 - Manual (Page 24)

Page 24 Coby Electronics Corporation
En
gl
ish
www.cobyusa.com Page 25
Getting Started
Turning the Unit On
Locate the Main Power switch on the rear panel of the unit and set 1.
it to the ON position.
Press <POWER/STANDBY> to turn the player on.
2.
Select the Video Line
Press <V-MODE> on the remote to set the video mode that cor- 1.
responds to the video connection used (e.g., Component or Com-
posite). See the Connections section for details.
Set your TV to display the video line connection that corresponds
2.
to your DVD player (e.g., AV1, AV2, HDMI, Component, S-Video,
DVD, etc.) The DVD output will be displayed on the TV screen
when the proper line has been selected.
Select the Source Mode
For more information about each of the source modes, please refer to
their respective sections in this manual.
Press <SOURCE> on the remote to switch between DVD, TUNER, 
and LINE modes.
Select DVD mode to play optical discs (e.g., DVD, CD, or CD+G) —
from the disc tray.
Select TUNER to enjoy radio broadcasts.
—
Select LINE mode to enjoy audio from an external device con- —
nected to the LINE IN jacks (optional).