COBY electronic DVD938 - Manual (Page 50)

Page 50 Coby Electronics Corporation
En
gl
ish
www.cobyusa.com Page 51
Troubleshooting
Symptom Cause Remedy
No Power The AC power cord is
not connected to the
power supply or is not
connected securely Please check that the AC power
cord is connected securely.
There is no picture
or the picture is
distorted The Video Input mode of
the connected TV is set
incorrectly. Set the TV to the correct source
mode. Most TVs have a “Source”
or “TV/Video” button that changes
the source mode. Please refer to
the documentation provided by
the TV manufacturer for further
assistance.
The Video Output mode
is set incorrectly. Press <V-MODE> repeatedly until
the picture becomes normal again.
The video cable connec-
tion is loose. Connect the video cable securely.
There is no sound
or the sound is
distorted The audio cable connec-
tions are loose. Connect the audio cables securely.
The volume is set at the
lowest level. Turn up the volume.
The sound is switched
off (MUTE is active). Press <MUTE> on the remote
control to re-enable the sound.
The disc is in fast for-
ward/rewind playback. Press <PLAY/PAUSE>.