Cisco OL-8555-02 - Manual (Page 4)

Chapter 6 Viewing Model Information, Status, Statistics, and Security Information on the Cisco Unified IP Phone
Status Menu
6-4
Cisco Unified IP Phone 7940G/7960G Administration Guide for Cisco Unified CallManager 4.2(3)
OL-8555-02
• Network Statistics—Displays the Network Statistics screen, which shows
Ethernet traffic statistics. For more information, see the
“Network Statistics
Screen” section on page 6-12 .
• Firmware Versions—Displays the Firmware Versions screen, which shows
information about the firmware running on the phone. For more information,
see the
“Firmware Versions Screen” section on page 6-14 .
• Expansion Module Stats—Displays the Expansion Module Stats screen,
which shows information about the Cisco Unified IP Phone 7914 Expansion
Module or modules, if connected to the phone. For more information, see the
“Expansion Module Stats Screen” section on page 6-15 .
• Call Statistics—Displays the Call Statistics screen, which shows information
about the phone call on the phone. For more information, see the
“Call
Statistics Screen” section on page 6-16 .
Status Messages Screen
The Status Messages screen displays up to the 10 most recent status messages that
the phone has generated. You can access this screen at any time, even if the phone
has not finished starting up.
Table 6-2 describes the status messages that might
appear. This table also includes actions you can take to address errors that are
indicated.
To display the Status Messages screen, follow these steps:
Procedure
Step 1 Press the Settings button.
Step 2 Select Status.
Step 3 Select Status Messages.
Note To remove current status messages, press the Clear softkey.
Table 6-2 provides a list of the Status Messages with their description and
explanation.