CNet Technology CWR-800 - Manual (Page 17)

DHCP Auto Config
If you are connecting through DHCP or a dynamic IP address from your ISP, perform these steps:
A. Keep the default setting, DHCP Auto Config, as the Configuration Type.
B. Click the Apply button to save the setting, or click the Cancel button to clear the setting and
start over. When you are finished, proceed to step 6.
Static IP Address
If you are connecting through a static or fixed IP address from your ISP, perform these steps:
A. Select Static IP as the Configuration Type.
B. Enter the Internet IP Address.
C. Enter the Subnet Mask.
D. Enter the Default Gateway.
E. Enter the DNS in the 1, 2, and/or 3 fields. You need to enter at least one DNS address.