CNet Technology CWR-800 - Manual (Page 25)

PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet
connections. If you are connected to the Internet through a DSL line, check with your ISP to see if
they use PPPoE. If they do, you will have to enable PPPoE.
User Name and Password
Enter the User Name and Password provided by your ISP.
Connect on Demand: Max Idle Time
You can configure the Router to cut the Internet connection
after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection
has been terminated due to inactivity, Connect on Demand enables the Router to automatically
reestablish your connection as soon as you attempt to access the Internet again. If you wish to
activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of
minutes you want to have elapsed before your Internet connection terminates.
Keep Alive: Redial Period
If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your
connection. To use this option, click the radio button next to Keep Alive. In the Redial Period field,
you specify how often you want the Router to check the Internet connection. The default Redial
Period is 30 seconds.
To save your changes on this page, click the Apply button. To cancel any unsaved changes on
this page, click the Cancel button. To get more information about the features, click the Help
button.