CNet Technology CWR-800 - Manual (Page 38)

The Status screen displays the Router’s current status and configuration. All information is
read-only. It will updates and display automatically every 10 seconds.
Firmware Version
The version number of the firmware currently installed is displayed here.
Current Time
The current date and time are displayed here.
Host Name
The Host Name is the name of the Router. This entry is necessary for some ISPs.
Domain Name
The Domain Name is the name of the Router's domain. This entry is necessary for
some ISPs.
LAN
MAC Address
The MAC Address of the LAN interface is displayed here.
IP Address and Subnet Mask
The current IP Address and Subnet Mask of the Router, as seen
by users on your local area network (LAN), are displayed here.
DHCP Server
The status of the Router's DHCP server function is displayed here.
Wireless
MAC Address
The MAC Address of the wireless interface is displayed here.
Mode
The Mode of the wireless network is displayed here.
SSID
The SSID of the wireless network is displayed here.
Channel
The Channel of the wireless network is displayed here.
Encryption Function
The status of the WEP encryption is displayed here.
WAN
MAC Address
The MAC Address of the Internet interface is displayed here.
Configuration Type
The type of Internet connection is displayed here.
IP Address, Subnet Mask, and Default Gateway
The Router’s IP Address, Subnet Mask, and
Default Gateway Address, as seen by external users on the Internet, are displayed here.
DNS
The DNS (Domain Name System) IP Addresses currently used by the Router are shown
here. Multiple DNS IP settings are common. In most cases, the first available DNS entry is used.
WAN IP Release
Click the WAN IP Release button to delete the Router’s current Internet IP
address.
WAN IP Renew
Click the WAN IP Renew button to get a new Internet IP address for the Router.
To update the Router’s status information, click the Refresh button. To get more information about
the features, click the Help button.
Help