CNet Technology CWR-800 - Manual (Page 23)

1. Select Enable.
2. Enter your adapter’s MAC address in the MAC Address field.
3. To save your new settings, click the Apply button. To cancel your changes, click the Cancel
button. To get more information about the features, click the Help button.
To disable MAC address cloning, keep the default setting, Disable.
DHCP Auto Config
By default, the Router’s Configuration Type is set to DHCP Auto Config, and it should be kept
only if your ISP supports DHCP or you are connecting through a dynamic IP address.
To save your changes on this page, click the Apply button. To cancel any unsaved changes on
this page, click the Cancel button. To get more information about the features, click the Help
button.