Canon W7250 - Manual (Page 18)

Setting Up the Printer
6
1-6
Important
Assembling the Stand
The printer unit and stand set are packaged disassembled. For the W7200, or
when the stand is to be used with the W7250, the stand must be assembled
first. One hex driver is packed with the printer unit and another is provided
with the stand.
If the W7250 is to be placed on a table, go to “Setting Up the Printer”.
(
Æ P.1-9)
z Save the box and all packing material. You will need them again to pack the stand
for moving or shipping if the printer and stand are moved to another location in the
future.
1
Position stand leg R (a) as shown in the illustration, then insert the
stand lower stay (b) so the screw holes (c) match.
2
Position stand leg L (d) as shown in the illustration, then insert the left
end of the stand lower stay.
b
a
c
d