Setting with the garo device setup utility, Checking the printer mac address, Setting with the garo device setup utility -3 – Canon W7250 User Manual
Page 61: Checking the printer mac address -3
Setting with the GARO Device Setup Utility
3
2-3
Note
Setting with the GARO Device Setup Utility
If you are using Windows, you can use the GARO Device Setup Utility to
set the network information.
Checking the Printer MAC Address
This setting requires the MAC address. Perform the following procedure to
make a Status Print so you can check the MAC address. Before printing,
make sure A3 or larger size paper is set for printing.
z If you want to save paper, to display the MAC address, press the Online button on
the operation panel: MAIN MENU
→ Information → MAC Address. Make a note
of the displayed MAC address.
1
If the printer is off, press the Power button to switch the printer on.
After a few seconds “Online” is displayed in the operation panel and the
Online lamp lights.
2
Press the Online button twice to display “MAIN MENU”.
3
Press or to select “Test Print” then press .
Enter
Cancel
Cut Sheet
Roll Media
Paper Source
Data
Message
Power
Online
Enter
Cancel
Cut Sheet
Roll Media
Paper Source
Data
Message
Power
Online
M A I N M E N U
T e s t P r i n t