Canon FS 3.6 - Manual (Page 108)

108
Copying with CanoCraft FS Copy
Changing the Scanner Settings
Click the arrow (scanner selection) button to the right of the scanner
display box and select a scanner from the pull-down menu.
The name of the scanners registered in Windows will display in the pull-
down menu. (CanoScan FS2710 will normally display.)
Click the [Settings] button to the left of the scanner display box and
select a setting from the pull-down menu.
• Refer to the next page for instructions regarding the menu categories and
settings procedures.
Adjust the settings as required and click the [OK] button.