Canon FS 3.6 - Manual (Page 21)

21
Step 1 • Basic Procedures
CanoCraft FS Copy Program Window
• Ensure that the scanner and printer power is turned on before starting
Windows and CanoCraft FS Copy.
• CanoCraft FS Copy and CanoCraft FS cannot be run simultaneously.
• Color options in the image type panel are only available when a color
printer is specified in the printer selection field.
Image Type Button p. 104
Select a copying method: color and
grayscale. Color button is available only
with the printer setting set to a color
printer.
Title Bar
Displays the window name.
Click and drag this bar to
move the window on the
Windows desktop.
Close Box p. 106
Closes CanoCraft FS
Copy.
10-Key Numeric
Keypad
p. 105
Sets the number of
copies.
Stop Button p. 105
Halts copying.
Help Button
Displays Help topics for
CanoCraft FS Copy.
Start Button p. 105
Starts copying.
Copy Number Display p. 105
Displays the number of copies
currently specified. Numbers can
be input directly.
Reset Button
Resets the
number of
copies to one.
Brightness Slide Bar
p. 105
Adjusts the copy
density. The value
displays to its right
and will accept direct
input.
Printer Setup
Button
p. 107
Displays the printer
setup dialog.
Scanner Setup
Button
p. 108
Sets the scan resolu-
tion, file type, color
balance, focus and
ColorGear settings.
Printer Selection
Button
p. 107
Specifies the name of
the currently con-
nected printer.
Negative/Positive Film
Selection Button
Select either negative or
positive to match the
film in use.
Scanner Selection
Button
Select the scanner
model in use. Paper Size Selection
Button
Select the size of paper to
be output on the printer.
Film Type Selection
Button
Select either 35 mm or
IX240 film to match the
film in use.