Problems with scanning, Image is vertically or horizontally inverted – Canon FS 3.6 User Manual
Page 114
114
Appendices
Can’t start CanoCraft FS from within another application
Cause:
Scanner settings not correctly set in the application program
Solution:
Correct the scanner settings in the application program. See
the manual for the application program for instructions.
[CanoCraft FS or CanoCraft FS Copy is running. Close it and run this
program] message displays
Cause1:
You attempted to start CanoCraft FS when CanoCraft FS
Copy was already running
Solution1: Close CanoCraft FS Copy before starting CanoCraft FS.
Cause2:
You attempted to start CanoCraft FS Copy when CanoCraft
FS was already running
Solution2: Close CanoCraft FS before starting CanoCraft FS Copy.
Problems with Scanning
[Initializing film scanner. Please remove film] message displays
Cause 1:
Scanner power turned on with a film already inserted
Solution:
Remove the film and follow the instructions on the screen.
Cause 2:
Set period of time passed without scanner being operated
after power turned on
Solution:
Remove film and follow the instructions on the screen.
Image is vertically or horizontally inverted
Cause:
Film is inserted upside down or backwards
Solution 1: Insert the film with the correct orientation. (Getting Started
Guide)
Solution 2: Click the Rotate/Flip button and change the orientation of
Brightness of preview image and scanned image are different
Cause:
Display brightness settings are incorrect
Solution:
Adjust display brightness settings. (Display manual)