Canon FS 3.6 - Manual (Page 34)

34
Step 2 • Scanning
Right-click the settings display area
Highlight an option and click
• The current selection will have a check mark beside it
Click here to display the Output Resolution Settings dialog.
Click the [Settings] button or click
the [Settings] menu and select
[Output Resolution].
Output Resolution Settings Dialog
Click the [Add] button to add
a new resolution setting if the
one you require is not already
on the list.
Deletes resolution settings
that have been added.
Sets the resolution to the
selected setting.
Cancels the selection and closes the dialog.
Accepts the new settings and closes the dialog.
Selecting an Output Resolution Setting
Select an output resolution setting that matches your printer and the purpose of
the scanned image. Select a setting by right-clicking the settings display area,
highlighting an option with the mouse cursor and clicking it. When the menu
disappears, the new value will appear in the settings display area.
The setting can also be changed with the [Output Resolution] dialog, which is
summoned by clicking the [Settings] button or by clicking the [Settings] menu and
selecting [Output Resolution].
Output Resolution Settings Dialog
Highlight an option and click the [Setting] button.