Canon FS 3.6 - Manual (Page 22)

22
Step 1 • Basic Procedures
Image Type p. 30
The scanning mode can be set to black and white, 8-bit
grayscale or 24-bit colour. If CanoCraft FS is started as a
TWAIN driver from a TWAIN-compliant application, it can
also be set to 12-bit grayscale or 36-bit colour. (This setting
can also be adjusted with the Settings button.)
Scan Resolution p. 33
The scan resolution can be set to either 340, 680, 1360, or
2720 dpi. Adjusting the magnification setting allows
custom resolution settings. (This setting can also be
adjusted in the display box at the top of the preview
window.)
Output Resolution p. 34
The output resolution settings can be selected from a list.
Selecting [Display Dialog] enables items to be edited,
added or deleted. (Items can also be edited, added or
deleted via the [Settings] button or by clicking the [Set-
tings] menu and selecting [Output Resolution].
Magnification p. 35
The output magnification can be set to either 50%,
100%, 200%, 400% or 800%. Adjusting the output
magnification value in the display box at the top of the
program window also allows custom magnification values.
(It can also be adjusted with the output resolution setting
at the top of the preview window.)
Film Type p. 29
You can select between 35 mm color negatives/color
positives/monochrome negatives or IX240 color negatives/
color positives/monochrome negatives. Set this with the
[Settings] button or the [Film Type] option on the Settings
pull-down menu.
Color Matching p. 75
The ColorGear color management system can be turned on
or off. A check mark indicates it is on, no check mark
indicates off. Click to toggle between modes. (This setting
can also be set with the Preferences dialog.
Settings Display Area Pop-Up Menu
Right-clicking on the settings display area summons a pop-up menu, which can be
used to change the adjustable settings.