Crestron electronic DIN Rail Control Processor DIN-AP2 - Manual (Page 21)

Crestron DIN-AP2 DIN Rail Control Processor
Versiport
Connections Depending on the application, the DIN-AP2’s Versiports can be wired
multiple ways. Refer to the following diagrams when wiring a Versiport.
WARNING: Incorrect wiring may damage the DIN-AP2 or the
connected device.
NOTE: The settings for input/output and the pull-up resistor are
specified in the control system program. For more information, refer to
the SIMPL Windows help file.
Versiport Wiring Diagrams—Digital Input Function
I/O Setup:
Digital Input
Pull-up Resistor:
Enabled
Detecting a contact
closure from a switch
or relay
I/O Setup:
Digital Input
Pull-up Resistor:
Disabled
Detecting a
voltage from a
switch or relay
24V DC Max.
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2
• 17