Crestron electronic DIN Rail Control Processor DIN-AP2 - Manual (Page 30)

DIN Rail Control Processor Crestron DIN-AP2
DIN-AP2 Troubleshooting (Continued)
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE
ACTION
MSG LED
illuminates. Hardware or
software failure,
hardware
incompatibility with
software
definitions or
programming
error. Verify that hardware
configuration matches
software configuration.
Use Crestron Toolbox
to display the error log.
Refer to “Error
Message Definitions”
in the latest version of
the Crestron 2-Series
Control Systems
Reference Guide
(Doc. 6256) for more
details.
System locks up. Various. Press and release the
HW-R button, then
press and hold SW-R
button to bypass
program and
communicate directly
with the processor.
(Refer to
“Troubleshooting
Communications” in
the latest version of the
Crestron 2-Series
Control Systems
Reference Guide (Doc.
6256) for more details.
(Continued on following page)
26
• DIN Rail Control Processor: DIN-AP2
Operations & Installation Guide – DOC. 6662A