Ldvt series direct vent gas fireplace, Wiring instructions, Ceramic refractory panels – Vermont Casting 43LDVT User Manual

Page 36: Remote controls

Advertising
background image

36

LDVT Series Direct Vent Gas Fireplace

10007852

The fireplace, when installed, must be
electrically connected and grounded in
accordance with local codes or, in the
absence of local codes, with the current
CSA C22.1 Canadian Electric Code.

For USA installations follow the local
codes and the national electrical code
ANSI/NFPA No. 70.

Should this fan require servicing or repair
the power supply must be disconnected.
For rewiring of any replacement parts refer
to Figure 49.

Any electrical re-wiring of this fan must be
done by a licensed electrician.

Wiring Instructions

Black

White

Ground

FP394

WIRING DIAGRAM

11/20/96

Fan

Temperature Sensor

Speed Control

FP1025

Fig. 49 FK24 fan wiring.

Ceramic refractory panels are available for the LDV
series appliances

Kit Model and Finish

Unit

Sandstone

Red

Black

Grey

33LDVT

GAHC3I0 GAFC3I0

GABC3I0 GAGC3I0

36LDVT GAHC3J0 GAFC3J0 GABC3J0 GAGC3J0
39LDVT 39LDVCR
43LDVT 43LDVCR

For aesthetic purposes we recommend
lining up the horizontal mortar lines.

Ceramic Refractory Panels

Take care when handling the refractory
panels as they are fragile until held in place
and supported.

Installation, refer to Figures 50 & 51
1. Remove the front window frame assembly.
2. Remove the logs.
3. Place the rear refractory panel in place. Locate the

lower edge of the panel in the ledge formed by the
top of the rear log support bracket.

4. Slide the side refractory panels into place to hold

the rear panel secure. Repeat the procedure on the
other side.

5. Replace the logs and window frame assembly.

FP1231

Ceramic panels

11/02

Side

Panel

Side

Panel

Log Support

Burner Tray

Back Panel

FP1231

Fig. 50 Ceramic panel installation.

FP1232

rear ceramic panel

11/02

Rear Refractory

Panel

Rear Panel Sup-

port Brackets

Rear Log

Support

Firebox Back

Panel

FP1232

Fig. 51 Rear refractory panel installation.

Optional remote control units are available to control
different functions of the appliances

Model

Function/s Controlled

RCI

ON/OFF

RC2

ON/OFF and Temperature.

IMTFK

Wall mounted thermostat control

Remote Controls

Advertising
This manual is related to the following products: