Connect Tech BLUE HEAT/NET SYNC CTIM-00044 - Manual (Page 40)

Connect Tech Blue Heat/Net Sync User Manual
40 Revision 0.03
Software Installation for Windows
The Blue Heat/Net Sync is designed for easy installation and set up.
This section deals with installing and using the Blue Heat/Net Sync software to communicate
with your Blue Heat/Net Sync.
To do so, you will use the CD included with the Blue Heat/Net Sync to install the Configuration
Manager on your computer. The Blue Heat/Net Sync Configuration Manager will allow you
install the Blue Heat/Net Sync on your local system, and map and configure the Blue Heat/Net
Sync‟s communication ports.
NOTE: Software support for Windows is still in development
Installing the Blue Heat/Net Sync Configuration Manager
The Blue Heat/Net Sync Configuration Manager is a tool to control your Blue Heat/Net Sync
from your local Windows operating system. To install the Blue Heat/Net Sync Configuration
Manager on your computer, insert the CD provided with your Blue Heat/Net Sync into the disk
drive.
You should see this window in your browser:
Figure 24: Blue Heat/Net Sync Driver/Software Installation CD
NOTE: Windows XP SP2 users should read the SP2 info
prior to installing the Configuration Manager
Select View from the Blue Heat/Net Sync software. It will bring you to the following screen.
Click Install to begin the Configuration Manager installation. Ensure you choose Open or Run
when the File Download window appears and asks if you‟d like to open the file or save it to
your computer.