Connect Tech BLUE HEAT/NET SYNC CTIM-00044 - Manual (Page 46)

Connect Tech Blue Heat/Net Sync User Manual
46 Revision 0.03
Auto Discover Blue Heat/Net Sync
The auto discover will broadcast a message to all the Blue Heat/Net Sync devices on your
network. Upon receiving the broadcast packet, the Blue Heat/Net Sync device will respond.
Click the Auto Discover button to search for Blue Heat/Net. The searching domain can be
changed by checking Use Specific Broadcast IP
and entering an IP address domain in the IP
address box. The broadcast packet will use the default UDP port 49152, but it can be changed in
the Blue Heat/Net Sync configuration. The Stop button will end the search.
Figure 29: Auto Discover Blue Heat/Net Sync Screen
Auto Discover will list any Blue Heat/Net Sync on your network, along with Blue Heat/Net
Sync's serial number, IP address, host name, number of available ports and the MAC address.
To install a Blue Heat/Net Sync check the appropriate box under Serial # column and then click
OK. Right click for more options, including the option to launch the Web Configuration
Manager.