Default settings, Network settings, Boot settings – Connect Tech BLUE HEAT/NET SYNC CTIM-00044 User Manual
Page 67: Scm operation settings
Connect Tech Blue Heat/Net Sync User Manual
Revision 0.01
67
67
Default Settings
Network Settings
Blue Heat/Net Sync IP address
192.168.42.1
Server IP address
0.0.0.0 (used for firmware downloads)
Gateway IP address
0.0.0.0
Subnet Mask
255.255.255.0
Broadcast IP address
255.255.255.255 (used by the bootp process)
Domain Name Server IP address: 0.0.0.0 (used for firmware downloads)
Domain Name
blueheat.net
Host Name
BHNssssssss
(where ssssssss is the BHN serial number)
TCP Port
49152 (0xC000)
DNS IP
0.0.0.0
Boot Settings
Default enabled:
Boot from Flash
Default disabled:
use BOOTP
use TFTP
Delay: 30 (seconds)
SCM Operation Settings
Password:
password
Password Prompting:
enabled
Loader Filename:
BHNloader_vvv.gz
(where vvv is the version number of the Loader, current at the time the unit was manufactured).
Line Setting:
section.