Connect Tech BLUE HEAT/NET SYNC CTIM-00044 - Manual (Page 47)

Connect Tech Blue Heat/Net Sync User Manual
Revision 0.03 47
Firmware Upgrades
If you need to re-install your current firmware, it is located in the firmware directory of the CD
you received with your Blue Heat/Net Sync.
Newer firmware versions are available from Connect Tech‟s website,
http://www.connecttech.com/asp/Support/DownloadZone.asp . Choose Blue Heat/Net Sync
product. Ensure the following parameters are set: mip, sip, gip and dns_ip using the SCM. To
upgrade your Blue Heat/Net Sync firmware, you can use any of the following three methods,
depending on your preference.
Upgrade using WCM (Web Configuration Manager)
The Web Configuration Manager is the easiest way to upgrade your firmware. Simply log onto
the WCM as described in the
WCM (Web Configuration Manager) section, and click on the
Firmware link on the left menu. This will bring you to the Firmware page. You will have the
option to upgrade from the remote CTI website, or to download the upgrade from a local FTP
server.
If you choose to upgrade via a local FTP server, copy the firmware (*.tar) file to the anonymous
directory of a local FTP server. If you do not have a local FTP server, contact your system
administrator to set one up.
Upgrade using SCM (Serial Configuration Manager)
The SCM method of upgrading is used when the Blue Heat/Net Sync does not boot properly.
You can reinstall your original firmware from the supplied CD, or you can download any newer
versions that exist from the CTI website in the
http://www.connecttech.com/asp/Support/DownloadZone.asp or go directly to the FTP site as
indicated below.
You will need the use of a TFTP server. (Contact your system administrator to obtain access to
a TFTP server). Download the most recent firmware components from the FTP site
ftp://ftp.connecttech.com/pub/BHN/ . These files include BHNuClinux_X.XX.gz,
BHNloader_VXXX.gz and BHNjffs2_X.XX.gz.
These files contain all of the Blue Heat/Net Sync firmware. Follow the update command
instructions for the
SCM Command Reference to update each component.