Verykool i285 - Manual (Page 30)

Screen switch effect: set screen switch effect on or off.
Show operator name: show operator name.
Greeting text: set greeting text status and the greeting content.
Touch screen with vibration: set the vibration effect on or off
when touching screen.
Screen rotate follow sensor: set whether the screen rotates
according to the rotating status of mobile phone.
Schedule power on/off: after setting and activating this function,
the mobile phone will be automatically powered on/off at the
corresponding setting time.
1.1.17 LCD backlight
You can set the brightness and timing of the LCD backlight
respectively.
1.1.18 Call settings
1.1.1.1
Call settings
Caller ID: you can set whether to allow your phone number being
displayed or not through the network with hide ID or send ID. This
function needs to be supported by the network service provider. Get
in touch with the network service provider to request this service.
Call waiting: you can activate/deactivate this function and also can
check the status of call waiting. After this function has been
activated, if you have a new incoming call while on another call,
your mobile phone will display the new call screen, and the call can
be received normally. If the function is deactivated, new incoming
calls cannot be displayed.
Call divert: this function is used to transfer the call to a designated
phone. The success of the call divert setting is related to the network
and the SIM card. The system will give appropriate setting tips.
Note:
If the phone you designate is a land line, please add the area
code before the phone number.
Call barring: this function needs network support. Contact your
network provider to request this service. The network provider will
provide the corresponding network password for you activate call
barring service.
Line switching: switch the current phone line.