Verykool i285 User Manual
Page 34
The Connection management interface shows the current
connection status of the mobile, including the network type and
speed.
1.1.1.14
Date account
GSM Data:
enter into GSM Data; you can add a GSM data account..
GPRS: enter into GPRS; you can add a GPRS account
1.1.1.15
WLAN
To enter WLAN, add and enable WLAN from the Menu key menu.
When WLAN is activated, the WLAN interface shows the available
AP (Access Point) nearby. Select an unconnected AP and several
options (connect, define access point and current status) will
appear. Press a connected AP and several options (disconnect,
edit, delete, change priority and current status) will appear.
1.1.1.16
Bluetooth
In connectivity, you can find the connectivity mode of Bluetooth.
Enter into the Bluetooth menu list screen, which operates as
follows:
Power on: turn on/off the Bluetooth function. When the Bluetooth
function is turned off, all Bluetooth connections are ended. You can
transmit and receive data by using Bluetooth. Turn off the Bluetooth
function when your phone is used for other operations, because the
Bluetooth connection will use up the battery.
Close Visibility: set on/off visibility of Bluetooth.
My device: enter into my device, if not connected to another
device, you can select Search new device to search for a mobile
phone to connect with and a list of Bluetooth devices which have
connected with this handset previously are shown on the screen.
Inquiry audio device: system will automatically search for the
hands-free device, and then shows the results after searching.
Change device name: you can change the phone name.
Advanced: you can set the audio path, storage, sharing
permission, remote control and view your address.
Note:
The files received that were transmitted by Bluetooth are
automatically stored in the Received folder.