Verykool i285 - Manual (Page 44)

memory card in the mobile phone; connect the mobile phone and
PC with the included USB cable, and then the mobile phone
becomes a mass storage device. If you connect the USB cable to
the PC with the mobile phone power on, you can select Mass
Storage to enable USB mass storage or select Back to maintain
the power on status and charge the mobile phone.
6.2 Webcam Function
With the mobile phone power on, connect the phone to the PC
using USB cable and select Webcam. The Webcam function is
activated and you can video chat with another person.
Requirements on PC configuration for use of webcam function:
1. The PC’s operation system is Windows XP SP2 or newer.
2. The tools for video chat need to be installed.
3. Internet network connection is smooth.
Other descriptions:
1. This function supports plug-and-play operation.
2. The actual refresh rate of video chat is related to Internet
network speed, and not a problem with the mobile phone.
6.3 COM port
In power on status, connect the phone to a PC using a USB cable
and select COM port. By doing this, you can synchronize your
phone with your PC. For details about the tools, consult with the
Customer Service Center .
7 Common Problems
The mobile phone cannot be powered on
n
The mobile phone cannot be powered on since the battery
power is too low. Please recharge the battery.
Unable to make calls
n
Call barring has been set and barred use of the mobile phone.
Please check this and cancel call barring.
Someone else is answering my calls