KERN & SOHN VFS 2T1 - Manual (Page 29)

8.1 Paper change
1 Draw-off edge and paper outlet
2 Cover plate
3 Bracket
Ö Switch off weighing system
Ö Pull out the bracket until the cover plate opens; do not apply too much force in
order to avoid damage.
Ö Insert the paper roll, the loose side
has to point forwards
Ö Hold fast the loose side of the paper
roll when the printer is being closed.
To close the printer:
Ö Press on both sides of the cover plate at the same time.
In order to pull-off the paper correctly:
Ö Pull the paper from one to the other side over the pull-off edge.
VFS-BA-e-1111 29