KERN & SOHN VHE 2T5A - Manual (Page 18)

8.3 Weighing
 Switch on the pallet truck scale using
key,
the balance carries out a selftest and changes then
to the zero display „0“ is displayed flashing.
If „0“ is not displayed, press

 Let the pallet truck scale lower onto the lowest point.
Three arrows are lighting up when the lowest point is
reached.
 Take up the load and lift till to reference height.
Three arrows are lighting up. The weight value is
displayed flashing. Continue lifting the load.
 Two arrows are lighting up. Lift slowly
 A arrow is lighting up. Lift slowly.
The reference height is reached. The symbol is
displayed. The display of the weight value does not
more flash.
The upper arrow is lighting up, when a load has been
lifted too high up. Lower the pallet truck scale
completely till to the ground to start a new weighing.
18 VHE-A-BA-e-1411