KERN & SOHN VHE 2T5A - Manual (Page 23)

10 Servicing, maintenance, disposal
10.1 Clean
Please do not use aggressive cleaning agents (solvents or similar agents), but a
cloth dampened with mild soap suds. Take care that the device is not penetrated by
fluids and polish it with a dry soft cloth.
10.2 Servicing, maintenance
The appliance may only be opened by trained service technicians who are
authorized by KERN.
The same maintenance guidelines as for standard manual lift truck without load-
display system.
General rules:
 Pulling instead of pushing allows an easier handling of the load (steering
wheels on the side of the drawbar)
 If the lifting device is not used, the manual lever should be left in centre
position. This prolongs the life span of the seals.
 The display unit should only be cleaned with a damp cloth. Chemical cleaning
agents and a pressurized water jet cause damage.
 To prevent damages to the electronic system and weighing cells it is
necessary that welding work on the entire weighing system is carried out
exclusively by technical specialists.
 The bearings of the wheels as well as the joints in the load roller section
should be regularly cleaned and greased.
10.3 Disposal
Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.
VHE-A-BA-e-1411 23