KERN & SOHN HFA 10T-3 - Manual (Page 25)

5.3 Turn on/off
Start-up

Press . The display lights up and the balance carries out a selftest. As soon
as the weight display appears, the instrument will be ready to weigh.
Switching Off

Press .
5.4 Set balance to zero
In order to obtain optimal weighing results, reset to zero the balance before weighing.

Unload the balance

Press , zero display as well as indicator ZERO will appear.
5.5 Taring

Attach initial load.
Press until zero display appears. The weight of the container is now
internally saved.

Weigh the material, the net weight will be indicated.

After removing the preload weight appears as negative display.

To delete the tare value, remove load from suspended balance and press .
HFA-BA-e-1511 25