KERN & SOHN HFA 10T-3 - Manual (Page 35)

8.2 Carry out linearization

Turn off balance and attach suitable lifting tackle.

Turn on balance with the lifting tackle attached and press
during self-test. The first function „F0bk“ is displayed.

Press repeatedly until „F5CAL“ is displayed.

Press , the last parameter set will be displayed.
• „nonLi“
Adjustment of balance
or
• „LinE“
Linearisation of balance

Select „LinE“ by

Press , “LoAd 0“ will appear. Make sure that no loads
apart from the lifting tackle are attached to the hook.

Wait for stability display and press again. “LoAd 1“
(1/3 max) will be displayed.

Attach first adjustment weight, wait for stability display
Press , “LoAd 2“ (2/3 max) will be displayed.
HFA-BA-e-1511 35