Centro 85-1620-6 - Manual (Page 14)

1 2
6
7
Multi-Purpose Side Burner Orifice Replacement
a) Remove side burner grate and control knob (Fig. A and B).
b) Disassemble the garbage door and garbage basket
(Fig. C and D).
Fig. A
c) Use a normal wrench to remove 3 nuts from the bottom of the
Multi-purpose Burner Side Heat Shield, visible from the space
inside of the garbage door, underneath the Multi-purpose Side
Burner (Figure E).
Fig. B
Fig. C Fig. D
Fig. E Fig. F
3 screws that are
under the Side Burner
Heat Shield
Safety Check. Confirm the following:
1. All 4 orifices have been removed from valves
(3 main U-Burner and Sear Zone Burner)
2. All 3 main U-Burner valve stems (Step 5) have
been adjusted to a horizontal position.
Once confirmed, the main burner conversion steps are com-
pleted. Reverse Step 3 to Step 1 to re-assemble the burner
box components.