Centro 85-1620-6 - Manual (Page 16)

1 4
10
Rotisserie Burner Orifice Replacement
Unscrew the 5 screws and nuts of the Rotisserie Burner from the
Rear Windshield Cover, located on the back of the burner box.
5 screws that need to
be taken out
Rear Rotisserie
Windshield
11
Using a wrench (NOT INCLUDED in the conversion kit) loosen the
Rotisserie Burner connector and the Metal Hose, located on the
back of the burner box as shown in Figure D.
Fig. E
Wrench
(not included in the
Conversion Kit)
Fig. D
Rotisserie Burner valve
connector and orifice
Rotisserie Burner
Venturi
Metal hose
Fig. A
Fig. B
Note: Once the Rotisserie Burner connector and metal
hose have been loosened, unscrew by hand (Figure E).
Fig. C