Centro 85-1620-6 - Manual (Page 17)

1 5
12
Unscrew the Wing nut by hand so that the orifice can be taken
out from the Rotisserie Burner Venturi (Figure A). Result shown in
Figure B. Use the orifice removal tool to take out the LP orifice, as
shown in Figure C. Then replace with a NG orifice that is provided
in the conversion kit package, as shown in Figure D.
Note: Before beginning re-assembly of Rotisserie Burner orifice,
ensure that the LP orifice has been removed. Proceed with re-
assembly by reversing Steps 10 to 12.
Replaced with NG orifice
LP orifice LP orifice removed
Fig. A
Fig. B
Fig. C
Fig. C
Fig. D Fig. D
Fig. D
Wing nut
Rotisserie
burner orifice
Orifice
removal tool
Rotisserie burner valve orifice