Centro 85-1620-6 - Manual (Page 15)

1 3
8
Remove the side burner from the unit (Fig.A).
Fig. 8
Using the orifice removal tool, remove the side burner
valve orifice (Figure B). (View from inside the garbage door,
underneath the Multi-purpose Side Burner).
9
Using the screwdriver provided, reach into the side burner valve
stem as shown. Turn the thread from horizontal position (LP posi-
tion) to vertical position (NG position).
VERY IMPORTANT!! This
step cannot be forgotten.
Multi-purpose Side Burner conversion has been completed. Reverse
Step 8, 7d, c, b, and a.
Fig. 9
Fig. A
Fig. B
Orifice
removal tool
Side Burner
valve orifice