LABEC AA-12S - Manual (Page 9)

SEA Series Steam Sterilizers
Operation manual 5
4.Control Panel of 8L/12L
Control Panel of 8L (Fig4-1)
1 Pressure Display
It displays chamber relative pressure in real time
during a cycle. The unit is per Bar.
2 Temperature
It displays chamber temperature during a cycle. The
unit is per Degrees Centigrade
3 State display/Error Codes
It displays all the states of autoclave. ( Look at the
state form) Error Codes when alarm goes on. You
may correct the error accordingly by looking it up
in the page of error codes and its corrections.
Caution: In case of faults, please contact your
distributor or the manufacturer immediately.
4 SELECT key
Program choose key. It is used for choosing the
temperature. You can choose the right program
according to the temperature that instrument can
afford. You can also choose B program, it can
+
sterilize medical cotton.
Package choose key. It is used for choosing two types mode of package. According to fact,
you can choose wrapped or unwrapped. Non-package use one time vacuumize, package use
B-standard vacuumize.
6 Test key
It is used for choosing the test program. If you push the button the indication light of B&D
goes on, and it means that you have chosen this testing program when you push again, the
indication light of Leak goes on, it means that you have chosen this program.
Fig 4-1
7
10
9
11
12
8
1
2
3
4
5
6
5 P AC K A GE k e y