LABEC V-18 - Manual (Page 7)

16/18 Manual
4
your instrument, keep it as far as possible from any strong magnetic or electrical
fields or any electrical device that may generate high-frequency fields. Set the
unit up in an area that is free of dust, corrosive gases and strong vibrations.
Fig.1-3
3. Remove any obstructions or materials that could hinder the flow of air under and
around the instrument.
4. Use the appropriate power cord and plug into a grounded outlet.
Fig.1-4
5. Turn on your
SPECTRO-
UV16/18 model spectrophotometer. Allow it to warm up for
20 minutes before taking any readings. We suggest you then do the Calibrate
System with the Search 656.1nm to set the wavelength to the deuterium lamp
emission line.
NOTE:
This symbol means Caution, Risk of Danger.
Control Panel
LCD
Compartment
Holder Changer Knob
Fan
Parallel Port USB Port Power Cord Inlet
Fuse
Power Switch