Malone MPG460G 2010 - Manual (Page 14)

MPG460G 01-2010
800-295-0042 ext 206 [email protected] 14
REFERENCE:
Trailer Wiring Color Code
•Brown = running lights
•Yellow = left turn / left brake
•Green = right turn / right brake
•White = ground
2. Sandwich the license plate mounting
bracket between the left side lamp and
the left side tail lamp bracket. Attach
the tail light using the nuts provided with
the lamp kit. Then mount the right side
lamp.
1. Attach the tail lamp brackets to
the frame as shown using 3/8” x 1”
carriage head bolts and nuts. No
washers are needed.
LIGHT ASSEMBLY (Group 3)
3. Use the 3 holes just above
the spring bracket to mount the
amber side lamps. Put the stud
through the forward hole and the
wire through the rear hole. Tuck
the wire so the lamp sits flush on
the frame. The middle hole is
unused.