Malone MPG460G 2010 - Manual (Page 18)

MPG460G 01-2010
800-295-0042 ext 206 [email protected] 18
5. Tighten bolts fully and repeat for other side.
Note that when bolting the mounting brackets to the frame you will install a
washer on both sides, under the head of each bolt and under each nut.
4. Using 3/8” x 1” bolts, washers on both
sides, and nuts, attach the fender brack-
ets to the slotted holes in the frame as
shown. NOTE you will use the center
hole in the bracket and the outside two
slotted holes in the frame.