Malone MPG460G 2010 - Manual (Page 17)

800-295-0042 ext 206 [email protected] 17
01-2010 MPG460G
FENDER ASSEMBLY (Group 4)
1. Connect all 4 fender brackets to the fenders using 3/8” x 3/4” slot head
screws and nuts. Assemble with the nuts to the inside of the fenders as
shown. No washers here.
Fully tighten all 8 screws
and nuts.
Note that fenders are
symmetrical and will fit
on either side of the trailer.