Malone MPG460G 2010 - Manual (Page 21)

800-295-0042 ext 206 [email protected] 21
01-2010 MPG460G
LOAD BAR ASSEMBLY (Group 6)
bag 11497
1. Attach a load bar support tube onto the
rear cross member. Cross the U-Bolts.
Center the support tube and brackets on the
trailer and tighten.
2. Attach the second support tube 48 inches forward.
Install these U-bolts parallel, not crossed. Measure
48” on both sides of the trailer to be sure the load bar
is on straight, then tighten the U-bolts.