Vertical Communications DSU II - Manual (Page 20)

Making Intercom Calls
There are two methods for making an intercom call. One causes the called telephone
to ring (tone-first). The other causes your voice to sound out at the called telephone
(voice-first). Your installer can set the system to deliver either tone-first or
voice-first calling.
Any user can change a call to the opposite method for that call simply by pressing the
INTERCOM button again after dialing the extension number.
· To manually cause the other telephone to ring (tone
calling),
1. LIFT handset.
2. DIAL extension number (called telephone will ring).
· To voice announce manually (voice calling),
1. PRESS
INTERCOM.
2. DIAL extension number.
3. SPEAK your announcement.
Automatic Dialing
There are two types of automatic dial numbers: (1) numbers that you store for your
own use (personal speed dial numbers), and (2) numbers that the system attendant
stores for everyone’s use (system speed dial numbers).
· To speed dial a personal speed dial number stored at the
dial pad,
1. LIFT handset.
2. DIAL speed dial number on dial pad (
0
to
9
).
· To speed dial a system speed dial number stored at the dial
pad,
1. LIFT handset.
2. DIAL
*
AND system speed dial number.
14 Single Line Proprietary Telephone Station User’s Guide
Making Calls GCA70-246