Vertical Communications DSU II - Manual (Page 40)

Tracker Paging System
The optional Tracker paging system allows you to send and receive messages on
Tracker Pagers assigned to station extension numbers. The Tracker system will also
park calls in orbit for retrieval by the paged party.
· To enable a Tracker Pager at your station,
1. LIFT handset AND PRESS
INTERCOM.
2. DIAL
*06
.
· To disable a Tracker Pager at your station,
1. LIFT handset AND PRESS
INTERCOM.
2. DIAL
#06
.
· To send a call back message to someone’s Tracker Pager
after receiving a ring—no answer,
1. MAKE an intercom call to someone and receive no answer.
2. DIAL
#01
.
3. After your station returns to idle* HANG UP handset to end. The
Tracker Pager system transmits your station extension number to
the called party’s Tracker Pager display. (Some models also
display your station name if the system is programmed to include
station names.)
* If the Tracker paging system does not accept your actions, an error tone will sound at
your telephone.
· To send a call back message to someone’s Tracker Pager
without first calling them,
1. PRESS
INTERCOM.
2. DIAL
#01
.
3. DIAL station extension number.
4. HANG UP handset. The Tracker Pager system transmits your sta-
tion extension number to the caller’s Tracker Pager display.
(Some models also display your station name if the system is pro-
grammed to include station names.)
34 Single Line Proprietary Telephone Station User’s Guide
Other Advanced Features GCA70-246