Answering and making calls, Lift handset, Lift handset . 2. dial – Vertical Communications DSU II User Manual
Page 9: Impact scs volume buttons
The volume control on your telephone is a multipur-
pose control you can use to set the volume
(loudness) of the ringer, the speaker, and the
handset.
·
To set the ringer loudness level,
1. While your telephone is on-hook and
idle, PRESS the
VOLUME UP OR
VOLUME DOWN button once for each
change in loudness you desire. The
ringer sounds once for each change as
an example of the current setting.
Answering and Making Calls
Your station is now properly configured to answer and making calls to both stations
within your system (intercom calls) and outside lines. Remember, when you dial an
outside number, you must first select a line to connect your system to the local
exchange.
·
When you hear outside ringing (two long bursts) or
intercom ringing (two short bursts),
1. LIFT handset.
·
To dial an outside number manually,
1. LIFT handset .
2. DIAL
9
OR other line button to select line (See Line Groups
in the system specific Advanced Features chapters for more infor-
mation on selecting an outside line).
3. LISTEN for dial tone.
4. DIAL number.
Single Line Proprietary Telephone Station User’s Guide
3
GCA70-246
Getting Started
Volume Up
Button
Volume
Down
Button
TAP
MUTE
HOLD
TRNS/CONF
INTERCOM
MESSAGE
*
0
#
WXY
9
TUV
8
PRS
7
GHI
4
JKL
5
MNO
6
DEF
3
1
ABC
2
R
TAP
MUTE
HOLD
TRNS/CONF
MESSAGE
Impact SCS Volume Buttons