Mytek Digital Stereo 192-DSD DAC (v.2.0) - Manual (Page 12)

Menu Operation
Menu is accessed by pressing the Menu button. Once in the Menu,
turning the rotary encoder cycles through the options while pressing
the encoder advances the selection. Pressing Menu button again
backs the selection one level until you exit the menu. All settings are
preserved when the unit is powered off.
Inputs
USB 1.1 - Driver-less, plug-n-play computer input that is limited to
96kHz.
USB 2.0 - Hi-speed computer input that is capable of 192kHz and
64x and 128xDSD playback. Use of this input requires drivers
installed on the computer. USB2.0 or the Firewire inputs provide the
highest quality playback.
FireWire - Hi-speed computer input that is capable of 192kHz and
64x and 128xDSD playback. Use of this input requires drivers
installed on the computer. USB2.0 or the Firewire inputs provide the
highest quality playback.
S/PDIF - Coaxial S/PDIF input capable of receiving PCM data up to
192kHz and DSD DOP (64xDSD only). This input can also be used
to transmit digital data to computer via FW connection.
AES/EBU - Professional digital input capable of receiving PCM data
up to 192kHz and DSD DOP (64xDSD only). This input can also be
used to transmit digital data to computer via FW connection.
Toslink - Optical S/PDIF input capable of receiving PCM data up to
192kHz and DSD DOP (64xDSD only). This input can also be used
to transmit digital data to computer via FW connection.
ADAT - Optical ADAT input capable of receiving PCM data up to
96kHz.. Signal is present on Channel 1-2 only. This input can also be
used to transmit digital data to computer via FW connection.
Analog - Unbalanced RCA analog input that can bypass the volume
control or be routed through it. Available on the Pre version only.
SDIF - Professional DSD input capable of receiving DSD64x and
DSD128x formats. This input can also be used to transmit digital
data to computer via FW connection. Mastering version only.
Upsampling
The Stereo192-DSD DAC can upsample all PCM data to 32 bit
192kHz allowing analog bandwidth of 100kHz alias free. Upsampling
for PCM, will automatically turn off when DSD data is encountered.
With USB1.1, PCM data
is automatically
upsampled.
www.mytekdigital.com Page: 12/48