Mytek Digital Stereo 192-DSD DAC (v.2.0) - Manual (Page 4)

Introduction
The Mytek Stereo192-DSD Digital to Analog Converter is an ultra-
transparent mastering grade digital audio playback system.
Designed around state of the art Sabre 32 bit conversion technology,
the Stereo192-DSD DAC delivers features and sound quality beyond
expectations of the most discerning listener. The DAC is capable of
converting high resolution PCM audio up to 192 kHz, and DSD audio
(up to 128xDSD on USB2 and FW) , through high-speed USB 2.0,
FireWire, AES/EBU, SPDIF, or TOSLINK. For the ultimate “plug and
play” solution, a USB 1.1 port is available for a driver free connection
that can handle PCM audio up to 96 kHz sample rates.
The “Preamp” version includes RCA analog inputs allowing the DAC
to operate as a preamp. The “Preamp” model is available in a silver
front panel with the LEDs removed for a cleaner look. These LEDs
can also be disabled in the menu on the both black panel versions.
The “Mastering” version of the DAC includes DSD SDIF inputs that
can be used to connect professional DSD systems. They replace
analog inputs found in preamp version.
Features
32 bit ESS Sabre DAC (8 mono DACs to 2 stereo outs)
Native 192kHz PCM and DSDx128 conversion
Ultra-low jitter (10 pico second) internal clock generator
Internal hardware PCM upsampler for CD sources to
192kHz/24bit (can be disabled)
Choice of Sharp and Slow PCM Filters; 50k/60k/70k DSD Filters
Choice of Transparent Analog or Digital stepped volume control
with Bypass for the purest signal path
Independent control of Main Outs and Headphones
High Current, High Slew Rate ultra low distortion 500mA
audiophile headphone amp
AES/EBU, S/PDIF, Toslink, ADAT digital inputs
FireWire400, USB2.0, USB1.1 computer interface
Analog input or DSD SDIF digital input (depending on model)
Wordclock In/Out
Apple and RC 5 remote control compatible
115/230V switchable linear power supply
www.mytekdigital.com Page: 4/48