Mytek Digital Stereo 192-DSD DAC (v.2.0) - Manual (Page 45)

Specifications
- Conversion: 32bit, PCM up to 192k, 64xDSD, 128xDSD.
- Dynamic Range: 128dB (ESS Sabre chipset in 8 mono to 2
stereo config.) THD DAC: -110dB.
- Digital Audio Inputs: SPDIF, AES/EBU, Toslink all up to 192k
single wire. (64xDSD and 128XDSD SDIF DSD interface on
Mastering Version).
- Clock: Internal Clock Generator (10ps jitter,) Wordclock In and
Out, or sync to incoming digital audio input with low jitter JET (tm)
PLL.
- Internal Async Hardware Upsampling- 16bit 44.1k etc. can be
optionally upsampled prior to conversion to 192k/24bit with clock
jitter eliminated.
- Transparent, 1dB stepped programmable analog attenuator,
separate for main out and headphones.
- Relay bypass of the attenuator for direct purist DAC out.
- A pair of unbalanced RCA analog ins for preamp functions
(assignable to volume control) (In Preamp Version).
- High Current, High Slew Rate ultra low distortion 500mA
hi-fi headphone amp.
- Worldwide user switchable linear power supply.
- Online downloadable firmware updates.
- Ability of converting standard digital audio inputs into computer
FW/USB input.
- Optional infrared remote (avail 2012).
- Enclosure: Compact portable 1/2 rack space 1.72in H x 8.5in W x
8.5in D.
- Weight 6 lbs.
User Menu Choices:
- Functions assignable to buttons: MUTE, PHASE INVERT,
MONO, (L-R), M/S, DIM.
- Selection of clock choices.
- Choice of upsampling or not.
- Selection of slow or fast/steep filter for PCM.
- Selection of 3 filters for out of band DSD.
- Assignable input selection (display only active).
- Dimmable intensity of display/led meter.
www.mytekdigital.com Page: 45/48