Clarion VRX878RVD - Manual (Page 22)

Basic Operations
26
VRX878RVD
English
Owner
’s ma
nua
l
Adjusting the balance/fader
Adjusting the BASS
The bass gain, bass frequency (centre
frequency) and bass Q can be adjusted as
follows.
Adjusting the MID
The MID gain, MID frequency (centre frequency)
and MID Q can be adjusted as follows.
Adjusting the TREBLE
The treble gain and treble frequency can be
adjusted as follows.
Adjusting the non fader output
volume
You can adjust the volume output from the unit’s
non fader output terminal.
Turning on/off the MAGNA BASS
EXTEND
The Magna Bass Extend does not adjust the low
sound area like the normal sound adjustment
function, but emphasises the deep bass sound
area to provide you with a dynamic sound.
2-1. Touch the [
]] key of the BAL/FAD item.
3-1. Touch the [
{] or [}] key to adjust to the
fader level.
• The factory default setting is “0”.
(Adjustment range: front 12 to rear 12)
[
{]:
Emphasises the sound from the front
speakers.
[
}]:
Emphasises the sound from the rear
speakers.
3-2. Touch the [
[] or []] key to adjust to the
balance level.
• The factory default setting is “0”.
(Adjustment range: left 13 to right 13)
[
[]:
Emphasises the sound from the left
speakers.
[
]]:
Emphasises the sound from the right
speakers.
2-1. Touch the [
]] key of the BASS item.
3-1. When the AUDIO BASS screen is
displayed, touch the [
[] or []] key for the
desirable type to adjust to a desirable level.
GAIN:
–6 to 8 (The factory default setting is “0”.)
FREQ.:
50Hz, 80Hz, 120Hz (The factory default
setting is “50Hz”.)
Q:
1, 1.25, 1.5, 2 (The factory default setting is
“1”.)
2-1. Touch the [
]] key of the MID item.
3-1. When the AUDIO MID screen is displayed,
touch the [
[] or []] key for the desirable type
to adjust to a desirable level.
GAIN:
–6 to 6 (The factory default setting is “0”.)
FREQ.:
700Hz, 1kHz, 2kHz (The factory default
setting is “1kHz”.)
Q:
1.5, 2 (The factory default setting is “2”.)
2-1. Touch the [
]] key of the TREBLE item.
3-1. When the AUDIO TREBLE screen is
displayed, touch the [
[] or []] key for the
desirable type to adjust to a desirable level.
GAIN:
–6 to 6 (The factory default setting is “0”.)
FREQ.:
8kHz, 12kHz (The factory default setting is
“12kHz”.)
2-1. Touch the [
[] or []] key of the NON FADER
VOL item to adjust to desirable level.
Setting range:
–6 to 6 (The factory default setting is “0”.)
2-1. Touch the [
C] key to display the next menu
screen.
3-1. Touch [ON] or [OFF] of the [M-B EX] item to
turn the Magna Bass Extend effect on or off
(The factory default setting is “OFF”).