Clarion VRX878RVD - Manual (Page 29)

33
VRX878RVD
English
Owner
’s ma
nua
l
Radio Operations
Listening to the radio
1. Press the [SRC] button, and touch the
[TUNER] key.
The TUNER mode screen is displayed.
2. Press the [BAND] button or touch the [Band]
key to select the radio band. Each time the
button is pressed, the radio reception band
changes in the following order:
FM1
➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜
FM1...
3. Press the [
R] or [F] button to tune in the
previous or next preset station.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
The DX SEEK can tune in to receivable
broadcast stations, and the LOCAL SEEK can
tune in to only broadcast stations with a good
reception condition.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM
(MW, LW)).
2. Tune in to a station.
• If “MANU” is displayed at the bottom of the
screen, keep pressing the [BAND] button
more than 1 second.
“MANU” on the screen goes off, and seek
tuning is now available.
* The same operation is available by using the
[Band] key.
• If “TA” is displayed on the screen, TP
stations are automatically sought.
●DX SEEK
Touch the [
X] or [x] key to automatically seek a
station.
When the [
x] key is touched, the station is
sought in the direction of higher frequencies; if
the [
X] key is touched, the station is sought in the
direction of lower frequencies.
• When the DX Seek tuning starts, “DX SEEK”
appears on the screen.
●LOCAL SEEK
If you keep touching the [
X] or [x] key more than
1 second, the Local Seek tuning is carried out.
The broadcast stations with good reception
sensitivity are automatically selected.
• When the Local Seek tuning starts, “LO SEEK”
appears on the screen.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BAND] button or touch the [Band]
key to select the desired band (FM or AM
(MW/LW)).
2. If “MANU” is not displayed at the bottom of the
screen, keep pressing the [BAND] button
more than 1 second.
“MANU” appears on the screen, and the
manual tuning is now available.
* The same operation is available by using the
[Band] key.
3. Tune into a station.
Quick tuning:
Touch and hold the [
X] or [x] key for more
than 1 second to tune in a station.
Step tuning:
Touch the [
X] or [x] key to manually tune in
a station.